View MXC7-PW50-0000_7569829.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features and benefts ? high efcacy for sustainable design ? compact 3535 2d package ? minimum 80 cri and r9 > 0 for quality indoor lighting ? ansi compliant 1/6th color binning key applications ? architecture ? downlight ? high bay and low bay ? indoor ? lamps ? outdoor ? specialty ? spotlight luxeon 3535 2d datasheet ds204 ?2014 philips lumileds lighting company. luxeon 3535 2d mid-power leds illumination portfolio introduction the luxeon 3535 mid-power 2d led portfolio in this datasheet delivers optimized performance in combination with quality of light needed for distributed light source applications. in addition to delivering specifed correlated color temperature and color rendering combinations, these emitters deliver the efcacy and reliability required by the indoor and outdoor illumination markets. this document contains the performance data needed to design and engineer applications based on these luxeon 3535 2d mid-power emitters.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. i tablefoffcontents generalfinformation f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f.f. 2 productfnomenclature ................................................................................... 2 averageflumenfmaintenancefcharacteristics f.............................................................. 2 environmentalfcompliance ............................................................................... 2 productfselection f........................................................................................... 3 opticalfcharacteristics ....................................................................................... 3 electricalfcharacteristics ..................................................................................... 4 absolutefmaximumfratings f.............................................................................. 4 jedecfmoisturefsensitivity ............................................................................... 4 refowfsolderingfcharacteristics .............................................................................. 5 mechanicalfdimensions f..................................................................................... 6 solderfpadfdesign ........................................................................................... 7 assemblyfprecautions f....................................................................................... 7 relativefspectralfdistribution ................................................................................. 8 lightfoutputfcharacteristics ................................................................................. 10 luminousfefcacyfcharacteristics ............................................................................ 11 forwardfcurrentfcharacteristics f............................................................................. 12 typicalfradiationfpatterns f.................................................................................. 13 emitterfpocketftapefpackaging .............................................................................. 14 emitterfreelfpackaging f..................................................................................... 15 productfbinningfandflabeling ............................................................................... 16 colorfbinfstructure f......................................................................................... 18
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 2 generalfinformation product nomenclature luxeon mid-power illumination emitters are tested and binned at 100 ma, with current pulse duration of 20 ms. all characteristic charts where the thermal pad is kept at constant temperature (25oc typically) are measured with current pulse duration of 20 ms. under these conditions, junction temperature and thermal pad temperature are the same. the part number designations for the mxca series is explained as follows: m x c a - b c d e - i j k l where: a designates minimum cri performance (value 7 = 70 minimum and 8 = 80 minimum) b designates radiation pattern (value p = lambertian) c designates color (value w = white) d, e designates nominal ansi cct (for example, 30 = 3000k and 40 = 4000k) i, j, k & l additional part number designation therefore products in this series with minimum cri value of 80, cct of 4000k will have the part numbering scheme: m x c 8 - p w 4 0 - 0 0 0 0 average lumen maintenance characteristics lumen maintenance for solid-state lighting devices (leds) is typically defned in terms of the percentage of initial light output remaining after a specifed period of time. lm-80 test reports are available upon request. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon mid-power leds are compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely reach and the rohs directive. philips lumileds will not intentionally add the following restricted materials to these leds: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde).
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 3 productfselection product selection for mid-power leds solder pad temperature = 25c, test current = 100 ma table 1. nominal f cct part f number minimumfcri typicalfcri r9 minfluminousf f fluxf(lm)fff f ? f v typfluminousf f fluxf(lm)fff f ? f v 2700k mxc8-pw27-0000 80 82 r9>0 55 69 mxc9-pw27-1111 85 90 r9>50 50 62 mxc9-pw27-0000 90 92 r9>50 50 61 3000k mxc8-pw30-0000 80 82 r9>0 55 72 mxc9-pw30-1111 85 90 r9>50 50 63 mxc9-pw30-0000 90 92 r9>50 50 62 3500k mxc8-pw35-0000 80 82 r9>0 55 69 mxc9-pw35-0000 85 90 typ 50 50 62 4000k mxc7-pw40-0000 70 72 - 70 77 mxc8-pw40-0000 80 82 r>0 60 73 mxc9-pw40-0000 85 90 typ 50 55 65 5000k MXC7-PW50-0000 70 72 - 70 77 mxc8-pw50-0000 80 82 r>0 60 75 5700k mxc7-pw57-0000 70 72 - 70 77 mxc8-pw57-0000 80 82 r>0 60 73 6500k mxc7-pw65-0000 70 72 - 70 77 mxc8-pw65-0000 80 82 r9>0 60 73 notefforftablef1: 1. philips lumileds maintains a tolerance of 7.5% on luminous fux and 2 on cri measurements. opticalfcharacteristics optical characteristics of mid-power leds solder pad temperature = 25c, test current = 100 ma table 2. nominal f cct colorftemperaturefcct typicalftotalf f includedfanglef [1] f (degrees)f u 0.90vf typicalf f viewingfanglef [2] f (degrees)f2 u ? minimum typical maximum 2700k 2550k 2700k 2850k 150 115 3000k 2850k 3000k 3200k 150 115 3500k 3200k 3500k 3750k 150 115 4000k 3750k 4000k 4250k 150 115 5000k 4700k 5000k 5300k 150 115 5700k 5300k 5700k 6000k 150 115 6500k 6000k 6500k 7000k 150 115 notesfforftablef2: 1. total angle at which 90% of total luminous fux is captured. 2. viewing angle is the of axis angle from lamp centerline where the luminous intensity is ? of the peak value.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 4 electricalfcharacteristics electrical characteristics of mid-power leds thermal pad temperature = 25c, test current = 100 ma table 3. partfnumber forwardfvoltagefv f f [1]f (v) typicalfftemperaturef coefcientfoffforwardf f voltage f[2] f(mv/c) f d v f f/f d t j typicalfthermalf resistance f junctionftofsolderfpadf (c/w) f r u f j-c minimum typical maximum mxcx-pwxx-0000 5.6 6.1 6.8 -2.0 to -4.0 18 notesfforftablef3: 1. philips lumileds maintains a tolerance of 0.10v on forward voltage measurements. 2. measured at t j between 25c and 110c. absolute maximum ratings table 4. parameter ffmaximumfperformance dc forward current (ma) [1] 200 peak pulsed forward current (ma) 200 esd sensitivity class 2 hbm per ansi/esda/jedec js-001-2012 pass 400v mm per jedec jesd22-a115c led junction temperature [2] 125c operating case temperature at 100 ma -40c - 105c storage temperature -40c - 105c soldering temperature jedec 020d 260c allowable refow cycles 3 reverse voltage (vr) [3], [4] -5v notesfforftablef4: 1. ripple current with a frequency of 50-150 hz is allowed, as long as the average of the current waveform is below 200 ma, and the maximum of the current waveform is lower than 200 ma. 2. proper current derating must be observed to maintain junction temperature below the maximum. 3. luxeon mid-power leds are not designed to be driven in reverse bias. 4. at maximum reverse current of 10 a. jedec moisture sensitivity table 5. level floorflife soakfrequirements f standard time conditions time conditions 2 1 year [ 30c / 60% rh 168 hrs. + 5 / - 0 hrs. [ 85c / 60% rh
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 5 refowfsolderingfcharacteristics table 6. refow profle in accordance with j-std-020d. profleffeature leadffreefassembly preheat/soak : temperature min (t smin ) temperature max (t smax ) maximum time (t s ) from t smin to t smax 150c 200c 120 seconds ramp-up rate (t l to t p ) 3c / second liquidous temperature (t l ) 217c maximum time (t l ) maintained above t l 150 seconds maximum peak package body temperature (t p ) 260c time (t p ) within 5c of the specifed temperature (t c ) 10-30 seconds maximum ramp-down rate (t p to t l ) 6c / second maximum time 25c to peak temperature 8 minutes notefforftablef6: 1. all temperatures refer to the application printed circuit board (pcb), measured on the surface adjacent to the package body. 0 50 100 150 200 250 300 05 0 100 150 200 250 300 te mp er at ur e ( c) ti me (s econds ) t l : 217 c 255 c +5 /- 0 c 260 c +0 /- 5 c t s : 60-120s ec . t l : 60-150 se c, ma x t p : 10-30s ec . 30s ec ma x. t smi n : 150 c ra mp -u p ra te , 3 c/ se c. ma x. t sma x :2 00 c t p : 260 c temperature profle for table 6.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 6 mechanicalfdimensions notesfforffiguref1: 1. all dimensions are in millimeters. 2. tolerance: 0.10mm. 3. materials ? lead frame: copper alloy with silver plating ? package body: high temperature thermal plastic ? encapsulant: silicone resin ? solder lead finish: sn-sn plating 2.6 3.7 max 3.400.15 3.500.15 part mark cathode 0.3 0.8 2.7 1.9 0.8 cathode anode figure 1. package outline drawing.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 7 solderfpadfdesign notesfforffiguref2: 1. the drawing above shows the recommended solder pad layout on printed circuit board (pcb). 2. application brief ab204 (to be released) provides extensive details for this layout. in addition, the .dwg fles are available at www.philipslumileds.com and www.philipslumileds.cn.com . assemblyfprecautions the luxeon emitter package contains a silicone overcoat to protect the led chip and extract the maximum amount of light. as with most silicones used in led optics, care must be taken to prevent any incompatible chemicals from directly or indirectly reacting with the silicone. the silicone overcoat used in the luxeon emitter is gas permeable. consequently, oxygen and volatile organic compound (voc) gas molecules can difuse into the silicone overcoat. vocs may originate from adhesives, solder fuxes, conformal coating materials, potting materials and even some of the inks that are used to print the pcbs. some vocs and chemicals react with silicone and produce discoloration and surface damage. other vocs do not chemically react with the silicone material directly but difuse into the silicone and oxidize during the presence of heat or light. regardless of the physical mechanism, both cases may afect the total led light output. since silicone permeability increases with temperature, more vocs may difuse into and/or evaporate out from the silicone. please refer to ab203 for more details on vocs and other incompatible chemicals. figure 2. solder pad layout.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 8 relativefspectralfdistribution relative intensity vs. wavelength, mxc7-pwxx relative intensity vs. wavelength, mxc8-pwxx figure 3a. typical color spectrum of mxc7-pwxx emitter, integrated measurement at solder pad temperature = 25c, forward current = 100 ma. figure 3b. typical color spectrum of mxc8-pwxx emitter, integrated measurement at solder pad temperature = 25c, forward current = 100 ma.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 9 relative intensity vs. wavelength, mxc9-pwxx figure 3c. typical color spectrum of mxc9-pwxx emitter, integrated measurement at solder pad temperature = 25c, forward current = 100 ma.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 10 lightfoutputfcharacteristics relative flux over temperature mxcx-pwxx relative flux vs. forward current mxcx-pwxx figure 4. typical relative light output vs. solder pad temperature, forward current = 100 ma. figure 5. typical relative luminous fux vs. forward current, solder pad temperature = 25oc.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 11 luminousfefcacyfcharacteristics relative luminous efcacy vs. forward current mxcx-pwxx figure 6. typical emitter efcacy versus forward current, solder pad temperature = 25c.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 12 forwardfcurrentfcharacteristics forward current vs. forward voltage mxcx-pwxx figure 7. typical forward current vs. forward voltage, solder pad temperature = 25c.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 13 typicalfradiationfpatterns radiation pattern in cartesian coordinate system radiation pattern in polar coordinate system figure 8. typical representative spatial radiation pattern. figure 9. typical polar plot of radiation pattern.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 14 emitterfpocketftapefpackaging notesfforffiguref10: 1. all dimensions are in millimeters 2. empty component pockets sealed with top cover tape 3. the maximum number of consecutive missing leds is two. 8.0 0.1 5.5 0.1 ?1 .5 0 4.0 0.1 2. 0 0.05 ?1.50 0.25/-0.0 12 +0.3/-0. 1 0.29 0.02 2.2 0.1 3.75 0.1 anode mark anode side 1.75 0 .1 3.85 0 .1 figure 10. emitter pocket tape packaging.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 15 emitterfreelfpackaging notesfforffiguref11: ? all dimentions are in millimeters. ? empty component pockets sealed with top cover tape. ? 329 mm reel - 5000 pieces per reel. ? minimum packing quantity is 5000 pieces. ? the maximum number of consecutive missing leds is two. ? in accordance with eia-481-1-b specifcation. 329 12,4 +2 -0 13,1 +0,5 -0,2 1.5 min 18.4 (max, measure at hub) 100 +/-0.5 figure 11. emitter reel packaging.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 16 productfbinningfandflabeling purposefoffproductfbinning in the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux, color and forward voltage (v f ). decodingfproductfbinflabeling luxeon mid-power emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given application. reels of 2700k, 3000k, 3500k, 4000k, 5000k, 5700k and 6500k emitters are labeled with a four digit alphanumeric cat code following the format below. abcd a = flux bin (d, etc.) b and c = color bin (for example 51, 52, 53, 54, 55, 56) d = v f bin luminous flux bins table 7 lists the standard photometric luminous fux bins for luxeon mid-power emitters (tested and binned at 100 ma). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 7. flux bins binfcode minimumfphotometricfflux f (lm) ffmaximumfphotometricfflux f (lm) a 55 60 b 60 65 c 65 70 d 70 75 e 75 80 f 80 85 g 85 90 h 90 95 testedfandfbinnedfatf25c,fif=100fma.fftesterftolerance:f7.5%.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 17 forward voltage bins table 8. v f bins binfcode minimumfforwardfvoltage f (v) ffmaximumfforwardfvoltage f (v) f 5.6 5.8 g 5.8 6 h 6 6.2 j 6.2 6.4 k 6.4 6.6 l 6.6 6.8 testedfandfbinnedfatf25c,fiff=f100fma.fftesterftolerance:f0.10v
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 18 colorfbinfstructure mxcx-pw27-xxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 9. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw27-xxxxfemitter binfcode x y binfcode x y 81 0.4625 0.4729 0.4813 0.4703 0.4113 0.4299 0.4319 0.4132 84 0.4446 0.4546 0.4625 0.4520 0.3910 0.4095 0.4113 0.3927 82 0.4520 0.4625 0.4703 0.4593 0.3927 0.4113 0.4132 0.3944 85 0.4468 0.4562 0.4646 0.4546 0.4077 0.4260 0.4280 0.4095 83 0.4546 0.4646 0.4729 0.4625 0.4095 0.4280 0.4299 0.4113 86 0.4373 0.4468 0.4546 0.4446 0.3893 0.4077 0.4095 0.3910 notesfforftablef9: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0.440 0.450 0.430 0.420 85 81 83 2700k 0.400 0.410 y 82 84 86 2700k 0.390 86 2580 2870k 0.380 2870k 0.370 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490 x figure 12. ansi 2700k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 19 colorfbinfstructure,fcontinued mxcx-pw30-xxxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 10. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw30-xxxxfemitter binfcode x y binfcode x y 71 0.4386 0.4474 0.4562 0.4468 0.4048 0.4228 0.4260 0.4077 74 0.4222 0.4305 0.4386 0.4298 0.3840 0.4019 0.4048 0.3867 72 0.4298 0.4386 0.4468 0.4373 0.3867 0.4048 0.4077 0.3893 75 0.4223 0.4299 0.4387 0.4305 0.3990 0.4165 0.4197 0.4019 73 0.4305 0.4387 0.4474 0.4386 0.4019 0.4197 0.4228 0.4048 76 0.4147 0.4223 0.4305 0.4222 0.3814 0.3990 0.4019 0.3840 notesfforftablef10: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0.435 0.445 0.425 0.415 3000k 75 71 73 0.395 0.405 y 3000k 72 74 0.385 0.395 74 76 2870k 0.375 3200k 0.365 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 x figure 13. ansi 3000k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 20 colorfbinfstructure,fcontinued mxcx-pw35-xxxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 11. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw35-xxxxfemitter binfcode x y binfcode x y 61 0.4130 0.4198 0.4299 0.4223 0.3944 0.4115 0.4165 0.3990 64 0.3975 0.4036 0.4130 0.4061 0.3731 0.3898 0.3944 0.3773 62 0.4061 0.4130 0.4223 0.4147 0.3773 0.3944 0.3990 0.3814 65 0.3943 0.3996 0.4097 0.4036 0.3853 0.4015 0.4065 0.3898 63 0.4036 0.4097 0.4198 0.4130 0.3898 0.4065 0.4115 0.3944 66 0.3889 0.3943 0.4036 0.3975 0.3690 0.3853 0.3898 0.3731 notesfforftablef11: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0 420 0.430 0.410 0 . 420 0.400 61 63 0.390 y 3500k 65 62 0.380 64 66 3250k 0.370 3750k 0.360 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 x figure 14. ansi 3500k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 21 colorfbinfstructure,fcontinued mxcx-pw40-xxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 12. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw40-xxxxxfemitter binfcode x y binfcode x y 51 0.3869 0.3916 0.4006 0.3952 0.3829 0.3987 0.4044 0.3880 54 0.3746 0.3786 0.3869 0.3822 0.3624 0.3777 0.3829 0.3670 52 0.3822 0.3869 0.3952 0.3898 0.3670 0.3829 0.3880 0.3716 55 0.3703 0.3736 0.3826 0.3786 0.3726 0.3874 0.3931 0.3777 53 0.3786 0.3826 0.3916 0.3869 0.3777 0.3931 0.3987 0.3829 56 0.3670 0.3703 0.3786 0.3746 0.3578 0.3726 0.3777 0.3624 notesfforftablef12: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0.410 0.420 0.400 0.390 51 53 55 0.370 0.380 y 4000k 52 54 55 0.360 3750k 56 0.350 4250 k 0.340 0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410 x figure 15. ansi 4000k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 22 colorfbinfstructure,fcontinued mxcx-pw50-xxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 13. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw50-xxxxfemitter binfcode x y binfcode x y 31 0.3479 0.3493 0.3551 0.3533 0.3580 0.3712 0.3760 0.3624 34 0.3416 0.3425 0.3479 0.3465 0.3408 0.3536 0.3580 0.3448 32 0.3465 0.3479 0.3533 0.3515 0.3448 0.3580 0.3624 0.3487 35 0.3371 0.3376 0.3434 0.3425 0.3493 0.3616 0.3664 0.3536 33 0.3425 0.3434 0.3493 0.3479 0.3536 0.3664 0.3712 0.3580 36 0.3366 0.3371 0.3425 0.3416 0.3369 0.3493 0.3536 0.3408 notesfforftablef13: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0 380 0.390 0.370 0 . 380 0.360 35 31 33 0.350 y 5000k 35 32 34 4750 k 0.340 5250k 36 0.330 5250k 0.320 0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365 x figure 16. ansi 5000k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 23 colorfbinfstructure,fcontinued mxcx-pw57-xxxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 14. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw57-xxxxxfemitter binfcode x y binfcode x y 21 0.3319 0.3320 0.3376 0.3371 0.3446 0.3565 0.3616 0.3493 24 0.3270 0.3267 0.3319 0.3318 0.3285 0.3399 0.3446 0.3327 22 0.3318 0.3319 0.3371 0.3366 0.3327 0.3446 0.3493 0.3369 25 0.3215 0.3207 0.3263 0.3267 0.3353 0.3462 0.3513 0.3399 23 0.3267 0.3263 0.3320 0.3319 0.3399 0.3513 0.3565 0.3446 26 0.3222 0.3215 0.3267 0.3270 0.3243 0.3353 0.3399 0.3285 notesfforftablef14: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0.370 0.360 21 0.350 25 21 23 0.340 y 5700k 22 24 26 5250k 0.330 6000k 26 0.320 6000k 0.310 0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350 x figure 17. ansi 5700k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. 24 colorfbinfstructure,fcontinued mxcx-pw65-xxxxx color bin structure luxeon mid-power emitters are tested and binned by x,y coordinates. table 15. luxeonfmid-powerfansif1/6fcolorfbinfcoordinatesfforfmxcx-pw65-xxxxxfemitter binfcode x y binfcode x y 11 0.3158 0.3146 0.3206 0.3213 0.3317 0.3422 0.3481 0.3371 14 0.3119 0.3103 0.3158 0.3170 0.3162 0.3263 0.3317 0.3212 12 0.3170 0.3158 0.3213 0.3221 0.3212 0.3317 0.3371 0.3261 15 0.3048 0.3028 0.3087 0.3103 0.3209 0.3304 0.3363 0.3263 13 0.3103 0.3087 0.3146 0.3158 0.3263 0.3363 0.3422 0.3317 16 0.3068 0.3048 0.3103 0.3119 0.3113 0.3209 0.3263 0.3162 notesfforftablef15: 1. tested and binned at 25c and if = 100 ma. tester tolerance: +/- 0.01 in x and y coordinates 0 355 0.365 0.345 0 . 355 0.335 11 13 0.325 y 6500k 15 12 14 6000k 0.315 7000k 16 0.305 7000k 0.295 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 x figure 18. ansi 6500k 1/6th color bin structure.
luxeon 3535 2d datasheet ds204 20140327 ?2014 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www.philipslumileds.com www.philipslumileds.cn.com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. whofwefare philips lumileds focuses on one goal: creating the worlds highest performing leds. the company pioneered the use of solid-state lighting in breakthrough products such as the frst led backlit tv, the frst led fash in camera phones, and the frst led daytime running lights for cars. today we ofer the most comprehensive portfolio of high quality leds and uncompromising service. philips lumileds brings leds qualities of energy efciency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retroft lamps. our products are engineered for optimal light quality and unprecedented efcacy at the lowest overall cost. by ofering leds in chip, packaged and module form, we deliver supply chain fexibility to the inventors of next generation illumination. philips lumileds understands that solid state lighting is not just about energy efciency. it is about elegant design. reinventing form. engineering new materials. pioneering markets and simplifying the supply chain. its about a shared vision. learn more about our comprehensive portfolio of leds at www.philipslumileds.com .

▲Up To Search▲

Price & Availability of MXC7-PW50-0000

	To Download MXC7-PW50-0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .